SGM-14
This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.
This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.
| SGM-14 | |
| Type | Electret Condenser | 
| Frequency Response | 20~20,000 Hz | 
| Sensitivity | -32±3 dB*(25mV)*0dB=1V/Pa | 
| Polar Pattern | Hypercardioid | 
| Attenuation Switch | -10 dB | 
| Low Frequency Roll-off | 80 Hz | 
| Impedance | Rated impedance is 200Ω | 
| Max. SPL for 1% THD | 125dB (135dB with -10 dB Attenuation) | 
| Signal To Noise Ratio | 78dB | 
| Power Supply | 9~48VDC phantom power | 
| Output Connector | 3P XLR (M) | 
| Length | 360mm | 
| USER GUIDES | |
| SGM-14 SGM-14KA-04 | |
Based on the success of X-series performance microphones NX-8/NX-8S reenhance overall performance.
The JS-1T is a multi-pattern studio microphone with three selectable polar patterns…
The CX-508 Miniature clip on condenser microphone is designed for the miking of brass and wind instruments.
The CX-08S microphone provides a natural transparent sound for vocals.
Contact us if you have any comment, inquiry or question concerning our products & services.