SGM-14
This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.
This 14” shotgun microphone is designed for ENG, outdoor recording and other specialized uses. It provides narrow acceptance angle and is desirable for long distance sound pick up. Low cut and pad are available for best miking effect.
| SGM-14 | |
| Type | Electret Condenser |
| Frequency Response | 20~20,000 Hz |
| Sensitivity | -52±3dB*(2.5mV)*0dB=1V/μbar |
| Polar Pattern | Hypercardioid |
| Attenuation Switch | -10 dB |
| Low Frequency Roll-off | 80 Hz |
| Impedance | Rated impedance is 200Ω |
| Max. SPL for 1% THD | 125dB (135dB with -10 dB Attenuation) |
| Signal To Noise Ratio | 78dB |
| Power Supply | 9~48VDC phantom power |
| Output Connector | 3P XLR (M) |
| Length | 355.7mm |
| USER GUIDES | |
| SGM-14-02 | |
This cable is terminated with 3.5mm dummy stereo plug and XLR Female connector at each end.
CM-201i omnidirectional tie clip microphone & MA-500 phantom power adapter
Provides instant selection of normal or reversed phase of a balanced line without modification of equipment.
Contact us if you have any comment, inquiry or question concerning our products & services.