UR-816D + UT-16GT (Winds / Brass Pack)

UR-816D + UT-16GT (Winds Pack)

WHAT YOU GETIS SUITABLE FOR

INSTRUMENT

INSTRUMENT

SPECIFICATIONS

UR-816D + UT-16GT (Winds Pack)
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 502~960 MHz
3x Frequency Range
856.100 - 864.900 MHz (F band)
606.500 - 629.900 MHz (U band)
721.500 - 748.375 MHz (G band)
658.125 - 678.500 MHz (D band)
487.125 - 506.500 HHz (I band)
502.000 - 694.000 MHz (T band)
S/N ratio > 105dB
T.H.D. <0.6%@1KHz
Display LED
Display Contents Antenna A/B, RF/AF Status
Controls Power On/Off, Channel Selecting, Audio Level
Audio Output Level -12dB
AF Output Impedance 600Ω
Squelch Pilot Tone, Noise and Mute
Operation Voltage 12-18 VDC, 200mA
Output Connector 1 Balanced XLR socket
1 Unbalanced Ø6.3mm phone jack
Dimension(m/m 210mm (W)* 40mm (H)* 171mm (D) 

 

>> UT-16GT

AUDIO SPECIFICATIONS
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 502~960 MHz
3x Frequency Range 856.100 - 864.900 MHz (F band)
606.500 - 629.900 MHz (U band)
721.500 - 748.375 MHz (G band)
658.125 - 678.500 MHz (D band)
487.125 - 506.500 HHz (I band)
502.000 - 694.000 MHz (T band)
RF Outputs Maximum 10mW  
Stability ±10KHz
Frequency Deviation. ±48KHz
LED Display Power On/Off, Low battery 
Controls Power On/Off, AF Level, Channel Selecting, Mute
Spurious Emissions <-50 dBC
Audio Frequency Response  40~18,000 Hz
Battery LR03, AAA 1.5V

YOU MAY ALSO LIKE

CX-508W

Condenser Winds Microphone for Wireless Body-Pack Transmitter

A wireless version of CX-508.

JS-1T

Multi-Pattern Large Diaphragm Studio Mic

The JS-1T is a multi-pattern studio microphone with three selectable polar patterns…

CX-508

Condenser Winds Microphone

The CX-508 Miniature clip on condenser microphone is designed for the miking of brass and woodwind instruments.

CX-500F

Condenser Instrument Flute Microphone

The CX-500F is built with full range omni directional capsule with golden plating in and outside.

STAY IN TOUCH

Contact us if you have any comment, inquiry or question concerning our products & services.