PS-510M

The PS-510M is developed based on PS-500. The PS-510M provide both 9V battery power and
phantom power. It is built with earphone output for musician to monitor a preferred mix of two
microphone signals before goes to PA.

FCC CE
PS-510M

SPECIFICATIONS

PS-510M
Frequency Response 20~20,000 Hz
Power Supply Batt. Power 9V / 12~48V Phanton Power
Current Consumption Phantom: max. 20 mA
Battery: max. 80mA with Headphone(16Ω/32Ω)
Input Impedance 5 k Ω
Output Impedance 470 Ω balanced
Input 4P Mini XLR(M) (2 channels) 
Output Connector 3P XLR(M)
Headphone Jack 3.5mm
Dimension (m / m) 92mm(W)* 23mm(H)* 65mm(D)

YOU MAY ALSO LIKE

801CR

Cable with 4 Pin Hirose Connecter

Cable with 4 Pin Hirose Connecter

UC-900RX NEW

Antenna Distributor

The UC-900RX is designed for receivers. It provides 2 x 4 antenna inputs to minimize RF dead zone on a stage or any venue.

NM-43+CM501

Condenser Neckset Microphone

Condenser neckset microphone designed for conference, house of worship and lecterns.

DMC-10

Detachable Capsule Module

Extremely low touch noise capsule Module suitable for UF-10TH.

STAY IN TOUCH

Contact us if you have any comment, inquiry or question concerning our products & services.